HighPoint RocketRAID 404 4-Channel ATA133 Raid Host Controller

This card is simple to install and has saved my bacon on 2 occassions. I have 3 of these in production, and they have never let me down. I would reccomend using the hot-spare option as the rebuild can be time consuming.

Ive had this card for almost six months now. Im running it with 8 maxtor 250GBs, divided into two drives, using JBOD. Only problem Ive had is twice it has not recognized the drives on boot up, but each time after restarting, everything went back to...

First off, I want to say nevermind Bjorn's comments about this card. Some very basic how-to knowledge for installing drivers on Windows XP, and your in business. This RAID controller is absolutely excellent. I have 5 in service at present. They are all...

HighPoint seems to have cured the RAID 5 problem with new drivers. Go to the support page from the link provided here.

The RAID 5 enabled BIOS has severe write performance hit. It writes at a speed of 3MB/s with that's even lower than the LAN. And that's with a 3-drive RAID 5 setup. All drives are 8MB cache version of WD 80GB ones. HighPoint tech support acknowledged...

i have used promise controllers and previous highpoint controllers (all raid) and this is by far the most kicking card by far... i have 4x120 Maxtors in raid 0 and 2x60 Maxtors in raid1 ... not a problem at all... fast as hell!! hightly recommended......

Working perfectly with Windows 2003 (using the Windows 2000 drivers). Flashed bios to most recent version and using Raid 5 with 4 Maxtor 40gb drives (giving a total usable storage space of 120gb) Everything has worked perfectly so far (And all from...

Very nice RAID card. Had an onboard HPT370 controller in my old mainboard with dual RAID-0 setups. Pretty quick there but much much faster now with this card since I can have every disk on board as a master. Very good performance and low CPU...

I bought one of these guys in February. I attached two 40GB Western Digital drives (7200 RPM, 8 MB cache) and configured them in a RAID 0 array. I'm running Windows XP. I've had absolutely no problems with the setup. It was easy to configure, and has...

A RAID 5 option is now available as of this writing by simply updating the BIOS. The new BIOS (rev. 3.01) can be DL'd from the HighPoint website. No problems for a month now in a RAID 1/0 configuration. And, of course, Newegg's customer service is hard...